Piping & Pipeline Monitoring

Hard-To-Reach & High-Temperature Piping & Pipeline Monitoring

CALIPERAY One Strap On Pipe
UTT Thickness Reading
GUL On Pipeline
High Energy Piping Monitoring

MISTRAS offers non-destructive testing (NDT) monitoring solutions for corrosion and cracking in piping and pipelines in the oil & gas, power generation, and manufacturing industries.

Using industry-proven non-destructive testing (NDT) techniques, MISTRAS’ monitoring helps identify piping & pipeline damages before they cause more serious damage to other assets, the facility, or the environment.

Piping and pipelines are subject to a variety of defects, including, but not limited to:

  • Cracking
  • Corrosion
  • Wall thinning
  • Pitting
  • High temperature creep
  • Fatigue
  • Thermal shock
  • Weld defects

MISTRAS offers a variety of remote sensing technology so assets can be continuously monitored to detect damage as soon as it occurs.

Refinery Pipe Wall Thickness Trending

MISTRAS provides trending solutions to track pipe wall thickness in hard-to-access and high-temperature refinery piping.

Pipe wall thickness is a critical measurement for determining piping integrity. Corrosion and erosion in pipe walls can increase safety risks and decrease productivity if left untreated, as internal build-up can prevent product from moving through the piping. Because of the difficulty of accessing at-height and high-temperature piping, damages in these assets often go unnoticed, potentially allowing them to worsen.

MISTRAS' pipe wall thickness trending solutions utilizes ultrasonic testing (UT) technology to detect, trend, and report wall thickness measurements for overhead lines, reducers, elbows, tees and more. Our monitoring sensors are attached to the pipe with a clamp, rather than through welding, ensuring that structural integrity is not affected when MISTRAS installs the sensor.

MISTRAS' pipe wall thickness monitoring solutions communicate measurements directly back to a plant’s inspection data management software (IDMS, integrating with MISTRAS' industry-leading Plant Condition Management Software (PCMS) and other top-tier IDMSs.

High Energy Piping (HEP) Inspection & Monitoring

High Energy Piping (HEP) system failures in power plants can be caused by micro- and macro-cracking, flow noise variations, thermal fatigue, and thermal expansion, all of which can potentially lead to serious consequences.

Piping replacement is not always practical, and periodic inspections during outages allow cracks to worsen in the meantime. MISTRAS Group offers a state-of-the-art Acoustic Emission (AE) solution to continuously monitor for HEP cracking, helping you stay informed of your critical piping’s condition at all times.

Through HEP monitoring, MISTRAS helps plant operators to extend the intervals between traditional inspections, and enables them to make more informed maintenance decisions immediately if a crack deteriorates quickly, or on more long-term run/repair/replace decisions. Cracks are detected remotely and communicated back to plant maintenance personnel, and MISTRAS analysts provide support to address defect indications.

Pipeline Monitoring Services

Our remote pipeline monitoring solutions keep you informed of your pipeline’s condition at all times using permanently installed guided wave ultrasonic (GUL) collars to monitor large pipeline volumes. This technique can detect minuscule changes in pipe cross-sections (identifies changes of less than 1%), while limiting the need for inspectors to visit hard-to-access locations.

MISTRAS' pipeline monitoring solutions are often pre-installed on pipes and cabled back to a platform. MISTRAS monitors hundreds of buried, sleeved, and subsea pipes, and those in contaminated or hazardous locations.

What's Next?

Contact us to start customizing your solution today.

Click here to get started

Find your